09-30-2018, 03:23 PM
Run Viper4Android Fx app.
HEADSET SETTINGS
Master Power - ON
Viper-DCC - ON > select SONY-DR-BT101 (Apply this setting last. Because you will get different results with different selections. Choose the one that suits your headset)
FireEquilazer - ON > select ROCK than set dbs. (+5.5 I +7.0 I +2.7 I 0 I 0 I 0 I 0 I -0.5 I +2.7 I +2.0 )
Dynamic System - ON > Dynamic Bass %10-30 > Listening Device - UNKNOWN TYPE IV
Viper BASS - ON (For Headsets) / OFF (For Speakers) > Select Bass Mode - Subwoofer > Bass Frequency - 50HZ > Bass Boost 12 db
Viper Clarity - ON > Select Clarty Mode - XHIFI > Clarity - 10 db
Audority System Proctection - ON (If your headset is not support loud basses) - OFF (For loud sound)
PHONE SPEAKER SETTINGS
Master Power - ON
FireEquilazer - ON > select ROCK than set dbs. (+3.0 I +5.0 I +2.7 I +0.6 I -1.7 I -2.6 I -1.7 I -0.5 I +2.6 I +5.0 )
Reverberation - ON > Damping Factor %20 - Wet Signal %10 - Dry Signal %70 (For concert atmosfer ROOM size must be 100 m2< ... )
Extra Loud - ON > Select effect Strenght - Extreme > Max Gain 2x - Max Output 0 db.
BLUETOOTH SETTINGS (Can be same Headset Settings But I recommend reduce Bass settings. Power consumption will be reduced.)
Master Power - ON
Viper-DCC - ON > select SONY-DR-BT101 (Apply this setting last. Because you will get different results with different selections. Choose the one that suits your headset)
FireEquilazer - ON > select ROCK than set dbs. (+5.5 I +7.0 I +2.7 I 0 I 0 I 0 I 0 I -0.5 I +2.7 I +2.0 )
Dynamic System - ON > Dynamic Bass %10-20 > Listening Device - UNKNOWN TYPE II
Viper BASS - ON (For Headsets) / OFF (For Speakers) > Select Bass Mode - Subwoofer > Bass Frequency - 30HZ > Bass Boost 8 db
Viper Clarity - ON > Select Clarty Mode - XHIFI > Clarity - 10 db
Audority System Proctection - ON (If your headset is not support loud basses) - OFF (For loud sound)
USB DOCK SETTINGS (For USB Headset/DOCK/Home Soundsystem)
Master Power - ON
Viper-DCC - ON > select SONY-DR-BT101 (Apply this setting last. Because you will get different results with different selections. Choose the one that suits your headset)
FireEquilazer - ON > select ROCK than set dbs. (+3.0 I +5.0 I +2.7 I +0.6 I -1.7 I -2.6 I -1.7 I -0.5 I +2.6 I +5.0 )
Reverberation - ON > Damping Factor %20 - Wet Signal %10 - Dry Signal %70 (For concert atmosfer ROOM size must be 100 m2< ... )
Dynamic System - ON > Dynamic Bass %10-30 > Listening Device - UNKNOWN TYPE IV
Viper BASS - ON (For Headsets) / OFF (For Speakers) > Select Bass Mode - Subwoofer > Bass Frequency - 50HZ > Bass Boost 12 db
Viper Clarity - ON > Select Clarty Mode - XHIFI > Clarity - 10 db
Audority System Proctection - ON (If your headset is not support loud basses) - OFF (For loud sound)
HEADSET SETTINGS
Master Power - ON
Viper-DCC - ON > select SONY-DR-BT101 (Apply this setting last. Because you will get different results with different selections. Choose the one that suits your headset)
FireEquilazer - ON > select ROCK than set dbs. (+5.5 I +7.0 I +2.7 I 0 I 0 I 0 I 0 I -0.5 I +2.7 I +2.0 )
Dynamic System - ON > Dynamic Bass %10-30 > Listening Device - UNKNOWN TYPE IV
Viper BASS - ON (For Headsets) / OFF (For Speakers) > Select Bass Mode - Subwoofer > Bass Frequency - 50HZ > Bass Boost 12 db
Viper Clarity - ON > Select Clarty Mode - XHIFI > Clarity - 10 db
Audority System Proctection - ON (If your headset is not support loud basses) - OFF (For loud sound)
PHONE SPEAKER SETTINGS
Master Power - ON
FireEquilazer - ON > select ROCK than set dbs. (+3.0 I +5.0 I +2.7 I +0.6 I -1.7 I -2.6 I -1.7 I -0.5 I +2.6 I +5.0 )
Reverberation - ON > Damping Factor %20 - Wet Signal %10 - Dry Signal %70 (For concert atmosfer ROOM size must be 100 m2< ... )
Extra Loud - ON > Select effect Strenght - Extreme > Max Gain 2x - Max Output 0 db.
BLUETOOTH SETTINGS (Can be same Headset Settings But I recommend reduce Bass settings. Power consumption will be reduced.)
Master Power - ON
Viper-DCC - ON > select SONY-DR-BT101 (Apply this setting last. Because you will get different results with different selections. Choose the one that suits your headset)
FireEquilazer - ON > select ROCK than set dbs. (+5.5 I +7.0 I +2.7 I 0 I 0 I 0 I 0 I -0.5 I +2.7 I +2.0 )
Dynamic System - ON > Dynamic Bass %10-20 > Listening Device - UNKNOWN TYPE II
Viper BASS - ON (For Headsets) / OFF (For Speakers) > Select Bass Mode - Subwoofer > Bass Frequency - 30HZ > Bass Boost 8 db
Viper Clarity - ON > Select Clarty Mode - XHIFI > Clarity - 10 db
Audority System Proctection - ON (If your headset is not support loud basses) - OFF (For loud sound)
USB DOCK SETTINGS (For USB Headset/DOCK/Home Soundsystem)
Master Power - ON
Viper-DCC - ON > select SONY-DR-BT101 (Apply this setting last. Because you will get different results with different selections. Choose the one that suits your headset)
FireEquilazer - ON > select ROCK than set dbs. (+3.0 I +5.0 I +2.7 I +0.6 I -1.7 I -2.6 I -1.7 I -0.5 I +2.6 I +5.0 )
Reverberation - ON > Damping Factor %20 - Wet Signal %10 - Dry Signal %70 (For concert atmosfer ROOM size must be 100 m2< ... )
Dynamic System - ON > Dynamic Bass %10-30 > Listening Device - UNKNOWN TYPE IV
Viper BASS - ON (For Headsets) / OFF (For Speakers) > Select Bass Mode - Subwoofer > Bass Frequency - 50HZ > Bass Boost 12 db
Viper Clarity - ON > Select Clarty Mode - XHIFI > Clarity - 10 db
Audority System Proctection - ON (If your headset is not support loud basses) - OFF (For loud sound)
