youling257
超钻
超钻
  • UID304
  • 注册日期2015-08-01
  • 粉丝433
  • 发帖数5907
  • 威望28116
  • 被喜欢1951
  • 有效bug0
30楼#
发布于:2018-12-17 01:52
b371001339:复制出来是这样的
x86_64:/ $ lsmod
Module                  Size  Used by
pcc_cpufreq            16384  0
coretemp               1...
回到原帖
测下wifi速度
youling257
超钻
超钻
  • UID304
  • 注册日期2015-08-01
  • 粉丝433
  • 发帖数5907
  • 威望28116
  • 被喜欢1951
  • 有效bug0
31楼#
发布于:2018-12-17 01:54
b371001339:复制出来是这样的
x86_64:/ $ lsmod
Module                  Size  Used by
pcc_cpufreq            16384  0
coretemp               1...
回到原帖
这个8723bu是v4.3.6.11_12942.20141204_BTCOEX20140507
有个v4.4.5_24888.20171101_BTCOEX20151228的需要你测试
youling257
超钻
超钻
  • UID304
  • 注册日期2015-08-01
  • 粉丝433
  • 发帖数5907
  • 威望28116
  • 被喜欢1951
  • 有效bug0
32楼#
发布于:2018-12-17 01:56
删掉/system/lib/modules/4.19.7-android-x86_64+/kernel/drivers/net/wireless/8723bu.ko,
换这个rtl8723bu.ko,然后还是终端内su了以后depmod -a
备份下/system/lib/firmware/rtlwifi/rtl8723bu_nic.bin,可以复制粘贴到/sdcard里面
zip里面还有个rtl8723bu_nic.bin,复制粘贴到/system/lib/firmware/rtlwifi/里面,覆盖原来的rtl8723bu_nic.bin
重启进入系统,dmesg > /sdcard/dmesg.txt,上传
附件名称/大小 下载次数 最后更新
rtl8723bu.zip (693KB)  17 2018-12-17 01:54
b371001339
高级
高级
  • UID75923
  • 注册日期2018-12-15
  • 粉丝2
  • 发帖数29
  • 威望745
  • 被喜欢22
  • 有效bug0
  • 忠实会员
33楼#
发布于:2018-12-17 02:17
youling257:测下wifi速度回到原帖
这个文件延时46ms,下载66.3 Mbps,上传12.8Mbps





22:30  大佬,今天私信用完了,只能通过这种方式回复。上午通过echo mam 锁屏,刚开屏的时候WIFI是不需要重连的,重新得到的文档上传不了,放盘里了,看看这个行不行呢
链接:https://pan.baidu.com/s/1_JyWbpyWx1a0COJKvmE0_Q 提取码:7vh8
[b371001339于2018-12-17 22:36编辑了帖子]
youling257
超钻
超钻
  • UID304
  • 注册日期2015-08-01
  • 粉丝433
  • 发帖数5907
  • 威望28116
  • 被喜欢1951
  • 有效bug0
34楼#
发布于:2018-12-17 02:19
b371001339:这个文件延时46ms,下载66.3 Mbps,上传12.8Mbps回到原帖
弄32楼
youling257
超钻
超钻
  • UID304
  • 注册日期2015-08-01
  • 粉丝433
  • 发帖数5907
  • 威望28116
  • 被喜欢1951
  • 有效bug0
35楼#
发布于:2018-12-17 03:02
[    8.137610] RTL871X: module init start
[    8.137613] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40
[    8.137614] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40
[    8.187347] RTL871X: rtw_ndev_init(wlan0)
[    8.187797] RTL871X: rtw_ndev_init(wlan1)
[    8.188220] usbcore: registered new interface driver rtl8723bu
[    8.188223] RTL871X: module init ret=0
[    8.386010] RTL871X: module init start
[    8.386013] RTL871X: rtl8723bu v4.4.5_24888.20171101_BTCOEX20151228-664a
[    8.386014] RTL871X: rtl8723bu BT-Coex version = BTCOEX20151228-664a
[    8.386029] Error: Driver 'rtl8723bu' is already registered, aborting...
[    8.386031] RTL871X: module init ret=-16

我让你把8723bu.ko删了,你根本没删!
一个8723bu.ko,一个rtl8723bu.ko,
你现在用的还是rtl8723bu v4.3.6.11_12942
先注册了4.3.6的,4.4.5的根本没注册上!
youling257
超钻
超钻
  • UID304
  • 注册日期2015-08-01
  • 粉丝433
  • 发帖数5907
  • 威望28116
  • 被喜欢1951
  • 有效bug0
36楼#
发布于:2018-12-17 10:10
你这是16秒以后的dmesg,要你重启刚进入系统时的dmesg,从0秒开始
这个rtl8723bu.ko用起来怎么样?

[    9.942033] rtl8723bu: loading out-of-tree module taints kernel.
[    9.962220] RTL871X: module init start
[    9.962223] RTL871X: rtl8723bu v4.4.5_24888.20171101_BTCOEX20151228-664a
[    9.962224] RTL871X: rtl8723bu BT-Coex version = BTCOEX20151228-664a
[    9.962269] RTL871X:
[    9.962269] usb_endpoint_descriptor(0):
[    9.962270] RTL871X: bLength=7
[    9.962271] RTL871X: bDescriptorType=5
[    9.962272] RTL871X: bEndpointAddress=84
[    9.962273] RTL871X: wMaxPacketSize=512
[    9.962273] RTL871X: bInterval=0
[    9.962274] RTL871X: RT_usb_endpoint_is_bulk_in = 4
[    9.962275] RTL871X:
[    9.962275] usb_endpoint_descriptor(1):
[    9.962275] RTL871X: bLength=7
[    9.962276] RTL871X: bDescriptorType=5
[    9.962277] RTL871X: bEndpointAddress=5
[    9.962278] RTL871X: wMaxPacketSize=512
[    9.962278] RTL871X: bInterval=0
[    9.962279] RTL871X: RT_usb_endpoint_is_bulk_out = 5
[    9.962280] RTL871X:
[    9.962280] usb_endpoint_descriptor(2):
[    9.962280] RTL871X: bLength=7
[    9.962281] RTL871X: bDescriptorType=5
[    9.962282] RTL871X: bEndpointAddress=6
[    9.962282] RTL871X: wMaxPacketSize=512
[    9.962283] RTL871X: bInterval=0
[    9.962284] RTL871X: RT_usb_endpoint_is_bulk_out = 6
[    9.962285] RTL871X:
[    9.962285] usb_endpoint_descriptor(3):
[    9.962285] RTL871X: bLength=7
[    9.962286] RTL871X: bDescriptorType=5
[    9.962287] RTL871X: bEndpointAddress=87
[    9.962287] RTL871X: wMaxPacketSize=64
[    9.962288] RTL871X: bInterval=3
[    9.962289] RTL871X: RT_usb_endpoint_is_int_in = 7, Interval = 3
[    9.962290] RTL871X:
[    9.962290] usb_endpoint_descriptor(4):
[    9.962291] RTL871X: bLength=7
[    9.962291] RTL871X: bDescriptorType=5
[    9.962292] RTL871X: bEndpointAddress=8
[    9.962293] RTL871X: wMaxPacketSize=512
[    9.962293] RTL871X: bInterval=0
[    9.962294] RTL871X: RT_usb_endpoint_is_bulk_out = 8
[    9.962295] RTL871X:
[    9.962295] usb_endpoint_descriptor(5):
[    9.962296] RTL871X: bLength=7
[    9.962296] RTL871X: bDescriptorType=5
[    9.962297] RTL871X: bEndpointAddress=9
[    9.962298] RTL871X: wMaxPacketSize=512
[    9.962298] RTL871X: bInterval=0
[    9.962299] RTL871X: RT_usb_endpoint_is_bulk_out = 9
[    9.962300] RTL871X: nr_endpoint=6, in_num=2, out_num=4
[    9.962300]
[    9.962301] RTL871X: USB_SPEED_HIGH
[    9.962302] RTL871X: CHIP TYPE: RTL8723BU
[    9.962634] RTL871X: rtw_hal_config_rftype RF_Type is 3 TotalTxPath is 1
[    9.962637] RTL871X: Chip Version Info: CHIP_8723B_Normal_Chip_TSMC_F_CUT_1T1R_RomVer(0)
[    9.962640] RTL871X: _ConfigChipOutEP_8723 OutEpQueueSel(0x07), OutEpNumber(4)
[    9.962754] RTL871X: EEPROM type is E-FUSE
[    9.962859] RTL871X: Boot from EFUSE, Autoload OK !
[    9.963062] RTL871X: hal_EfuseSwitchToBank: Efuse switch bank to 0
[   10.010636] RTL871X: hal_ReadEFuse_WiFi: data end at address=0x82
[   10.010762] RTL871X: EEPROM VID = 0x bda
[   10.010764] RTL871X: EEPROM PID = 0xb720
[   10.010804] RTL871X: Hal_EfuseParseBTCoexistInfo_8723B: Enable BT-coex, ant_num=1
[   10.010807] RTL871X: hal_com_config_channel_plan chplan:0x20
[   10.010809] RTL871X: InitAdapterVariablesByPROM_8723BU(): REPLACEMENT = 0
[   10.010811] RTL871X: rtw_hal_read_chip_info in 48 ms
[   10.010861] RTL871X: init_channel_set((null)) ChannelPlan ID:0x20, ch num:13
[   10.011051] RTL871X: NR_RECVBUFF: 8
[   10.011053] RTL871X: MAX_RECVBUF_SZ: 15360
[   10.011058] RTL871X: NR_PREALLOC_RECV_SKB: 8
[   10.011133] RTL871X: rtw_alloc_macid((null)) if1, hwaddr:ff:ff:ff:ff:ff:ff macid:1
[   10.011142] RTL871X: Init_ODM_ComInfo_8723b(): fab_ver=0 cut_ver=0
[   10.011154] RTL871X: default power by rate loaded
[   10.011262] RTL871X: default power limit loaded
[   10.011323] RTL871X: can't get autopm:
[   10.011327] RTL871X: rtw_macaddr_cfg mac addr:88:83:5d:a1:38:74
[   10.011330] RTL871X: bDriverStopped:True, bSurpriseRemoved:False, bup:0, hw_init_completed:0
[   10.011515] RTL871X: rtw_wiphy_alloc(phy0)
[   10.011519] RTL871X: rtw_wdev_alloc(padapter=0000000038baa1af)
[   10.011522] RTL871X: rtw_wiphy_register(phy0)
[   10.011524] RTL871X: Register RTW cfg80211 vendor cmd(0x67) interface
[   10.011749] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=88:83:5d:a1:38:74
[   10.012137] RTL871X: cfg80211_rtw_get_txpower
[   10.012223] usbcore: registered new interface driver rtl8723bu
[   10.012225] RTL871X: module init ret=0
[   10.182779] usbcore: registered new interface driver rtl8xxxu


[   26.371985] init: Starting service 'wpa_supplicant'...
[   26.579826] RTL871X: cfg80211_rtw_get_txpower
[   26.579848] RTL871X: cfg80211_rtw_get_txpower
[   26.579988] RTL871X: cfg80211_rtw_get_txpower
[   26.581031] RTL871X: cfg80211_rtw_get_txpower
[   26.581082] RTL871X: +871x_drv - drv_open, bup=0
[   26.581370] RTL871X:  power-on :REG_SYS_CLKR 0x09=0x7c. REG_CR 0x100=0xff.
[   26.581371] RTL871X:  MAC has already power on.
[   26.592147] RTL871X: SetHwReg8723B: bMacPwrCtrlOn=1
[   26.594064] usb 1-7: request firmware rtlwifi/rtl8723bu_nic.bin
[   26.602853] RTL871X: rtl8723b_FirmwareDownload(wlan0) tmp_ps=0
[   26.602864] RTL871X: rtl8723b_FirmwareDownload: fw_ver=29 fw_subver=0100 sig=0x5301, Month=10, Date=26, Hour=11, Minute=03
[   26.603139] RTL871X: rtl8723b_FirmwareDownload(): Shift for fw header!
[   26.662646] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x0c070605
[   26.663362] RTL871X: _8051Reset8723: Finish
[   26.693022] RTL871X: _FWFreeToGo: Polling FW ready OK! (399, 31ms), REG_MCUFWDL:0x0c0706c6
[   26.693026] RTL871X: FWDL success. write_fw:1, 61ms
[   26.693063] RTL871X:  <=== rtl8723b_FirmwareDownload()
[   26.693064] RTL871X: fw download ok!
[   27.292809] RTL871X: usb_AggSettingRxUpdate: RX Agg-USB mode, size=12KB, timeout=1024us
[   27.294017] RTL871X: ===>phy_SwChnl8723B: Channel = 1
[   27.306836] RTL871X: pDM_Odm TxPowerTrackControl = 1
[   27.306872] RTL871X: pDM_Odm TxPowerTrackControl = 1
[   27.630504] RTL871X: rtl8723bu_hal_init in 1049ms
[   27.631417] RTL871X: ===>phy_SwChnl8723B: Channel = 1
[   27.632047] RTL871X: #### hw_var_set_opmode() -4596 iface_type(0) mode = 2 ####
[   27.632206] RTL871X: Using the default RF gain.
[   27.632209] RTL871X: MAC Address = 88:83:5d:a1:38:74
[   27.632314] RTL871X: rtw_cfg80211_init_wiphy:rf_type=3
[   27.632317] RTL871X: [HT] HAL Support STBC = 0x01
[   27.632325] RTL871X: -871x_drv - drv_open, bup=1
[   27.632343] RTL871X: rtl8723b_c2h_packet_handler: C2H, ID=9 seq=111 len=7
[   27.632422] RTL871X: cfg80211_rtw_set_power_mgmt(wlan0) enabled:1, timeout:-1
[   27.632490] RTL871X: rtl8723b_c2h_packet_handler: C2H, ID=9 seq=0 len=7
[   27.634071] RTL871X: rtl8723b_c2h_packet_handler: C2H, ID=11 seq=1 len=7
[   27.634280] RTL871X: rtl8723b_c2h_packet_handler: C2H, ID=11 seq=2 len=7
[   27.634293] RTL871X: _btmpoper_cmd: C2H status = BT_STATUS_BT_OP_SUCCESS
[   27.634845] RTL871X: rtl8723b_c2h_packet_handler: C2H, ID=11 seq=3 len=7
[   27.635074] RTL871X: rtl8723b_c2h_packet_handler: C2H, ID=11 seq=4 len=7
[   27.635109] RTL871X: _btmpoper_cmd: C2H status = BT_STATUS_BT_OP_SUCCESS
[   27.635719] RTL871X: rtl8723b_c2h_packet_handler: C2H, ID=11 seq=5 len=7
[   27.635969] RTL871X: rtl8723b_c2h_packet_handler: C2H, ID=11 seq=6 len=7
[   27.636034] RTL871X: _btmpoper_cmd: C2H status = BT_STATUS_BT_OP_SUCCESS
[   27.636581] RTL871X: rtl8723b_c2h_packet_handler: C2H, ID=11 seq=7 len=7
[   27.636806] RTL871X: rtl8723b_c2h_packet_handler: C2H, ID=11 seq=8 len=7
[   27.636816] RTL871X: _btmpoper_cmd: C2H status = BT_STATUS_BT_OP_SUCCESS
[   27.637392] RTL871X: rtl8723b_c2h_packet_handler: C2H, ID=11 seq=9 len=7
[   27.637613] RTL871X: rtl8723b_c2h_packet_handler: C2H, ID=11 seq=10 len=7
[   27.637624] RTL871X: _btmpoper_cmd: C2H status = BT_STATUS_BT_OP_SUCCESS
[   27.638181] RTL871X: rtl8723b_c2h_packet_handler: C2H, ID=11 seq=11 len=7
[   27.638405] RTL871X: rtl8723b_c2h_packet_handler: C2H, ID=11 seq=12 len=7
[   27.638415] RTL871X: _btmpoper_cmd: C2H status = BT_STATUS_BT_OP_SUCCESS
[   27.639245] RTL871X: cfg80211_rtw_flush_pmksa(wlan0)
[   27.639478] RTL871X: rtl8723b_c2h_packet_handler: C2H, ID=9 seq=13 len=7
[   27.639877] RTL871X: rtl8723b_c2h_packet_handler: C2H, ID=9 seq=14 len=7
[   27.640488] RTL871X: rtl8723b_c2h_packet_handler: C2H, ID=11 seq=15 len=7
youling257
超钻
超钻
  • UID304
  • 注册日期2015-08-01
  • 粉丝433
  • 发帖数5907
  • 威望28116
  • 被喜欢1951
  • 有效bug0
37楼#
发布于:2018-12-17 10:58
终端内su了以后,echo mem > /sys/power/state,按电源键唤醒,wifi需不需要重连?
dmesg > /sdacard/dmesgsuspend.txt,上传,我需要看看suspend和resume的dmesg
youling257
超钻
超钻
  • UID304
  • 注册日期2015-08-01
  • 粉丝433
  • 发帖数5907
  • 威望28116
  • 被喜欢1951
  • 有效bug0
38楼#
发布于:2018-12-17 12:01
你直接echo mem > /sys/power/state关闭屏幕行不行,别用特么左下角的安卓锁屏、睡眠选项,
echo mem > /sys/power/state,十个小时以后再按电源键唤醒
youling257
超钻
超钻
  • UID304
  • 注册日期2015-08-01
  • 粉丝433
  • 发帖数5907
  • 威望28116
  • 被喜欢1951
  • 有效bug0
39楼#
发布于:2018-12-18 19:33
不能用在32位上
345718234
初级
初级
  • UID76419
  • 注册日期2018-12-23
  • 粉丝0
  • 发帖数10
  • 威望66
  • 被喜欢3
  • 有效bug0
40楼#
发布于:2018-12-23 20:22
kernel我查看是文件夹啊 你说的是重命名成文件 这如何替换只剩触摸不行 了
b371001339
高级
高级
  • UID75923
  • 注册日期2018-12-15
  • 粉丝2
  • 发帖数29
  • 威望745
  • 被喜欢22
  • 有效bug0
  • 忠实会员
41楼#
发布于:2018-12-24 13:06
345718234:kernel我查看是文件夹啊 你说的是重命名成文件 这如何替换只剩触摸不行 了回到原帖
http://bbs.phoenixstudio.org/cn/read.php?tid=25975&fid=12&page=2,这个帖子19楼
345718234
初级
初级
  • UID76419
  • 注册日期2018-12-23
  • 粉丝0
  • 发帖数10
  • 威望66
  • 被喜欢3
  • 有效bug0
42楼#
发布于:2018-12-26 07:29
kernel原版文件路径在哪?根据帖子的15楼操作还是找不到,你是如何处理好的?只剩不能触摸了也是中柏的,能提供下具体路径吗我是exe文件安装后5件套放在etx4中
345718234
初级
初级
  • UID76419
  • 注册日期2018-12-23
  • 粉丝0
  • 发帖数10
  • 威望66
  • 被喜欢3
  • 有效bug0
43楼#
发布于:2018-12-26 07:33
youling257:弄32楼回到原帖
kernel原版文件路径在哪?根据帖子的19楼操作还是找不到,你是如何处理好的?只剩不能触摸了也是中柏的,能提供下具体路径吗我是exe文件安装后5件套放在etx4中
b371001339
高级
高级
  • UID75923
  • 注册日期2018-12-15
  • 粉丝2
  • 发帖数29
  • 威望745
  • 被喜欢22
  • 有效bug0
  • 忠实会员
44楼#
发布于:2018-12-26 09:26
345718234:kernel原版文件路径在哪?根据帖子的19楼操作还是找不到,你是如何处理好的?只剩不能触摸了也是中柏的,能提供下具体路径吗我是exe文件安装后5件套放在etx4中回到原帖
五件套里面有个kernel文件,替换它
游客

返回顶部