youling257
超钻
超钻
  • UID304
  • 注册日期2015-08-01
  • 粉丝435
  • 发帖数5907
  • 威望28281
  • 被喜欢1967
  • 有效bug0
45楼#
发布于:2018-12-15 17:30
seesle:目录下没有那个文件,请问大神怎么办?谢谢回到原帖
ls -al /sys/class/input > /sdcard/input.txt,上传
youling257
超钻
超钻
  • UID304
  • 注册日期2015-08-01
  • 粉丝435
  • 发帖数5907
  • 威望28281
  • 被喜欢1967
  • 有效bug0
46楼#
发布于:2018-12-15 17:38
seesle:目录下没有那个文件,请问大神怎么办?谢谢回到原帖
干他妈的煞笔,3年前的补丁没加入到Linux内核里面,https://patchwork.kernel.org/patch/9325067/
等我重新编译个goodix.ko,就有dump_config了
youling257
超钻
超钻
  • UID304
  • 注册日期2015-08-01
  • 粉丝435
  • 发帖数5907
  • 威望28281
  • 被喜欢1967
  • 有效bug0
47楼#
发布于:2018-12-15 18:39
seesle:目录下没有那个文件,请问大神怎么办?谢谢回到原帖
换这个goodix.ko,重启导出dump_config
附件名称/大小 下载次数 最后更新
goodix.zip (10KB)  2 2018-12-15 18:39
seesle
初级
初级
  • UID75119
  • 注册日期2018-12-01
  • 粉丝0
  • 发帖数38
  • 威望227
  • 被喜欢7
  • 有效bug0
  • 忠实会员
48楼#
发布于:2018-12-15 22:46
youling257:换这个goodix.ko,重启导出dump_config回到原帖
替换goodix.ko后还是没有dump_config,请问大神是否我少了哪个步骤?谢谢谢谢
附件名称/大小 下载次数 最后更新
dmesg1.txt (86KB)  3 2018-12-15 22:57
youling257
超钻
超钻
  • UID304
  • 注册日期2015-08-01
  • 粉丝435
  • 发帖数5907
  • 威望28281
  • 被喜欢1967
  • 有效bug0
49楼#
发布于:2018-12-15 23:41
seesle:替换goodix.ko后还是没有dump_config,请问大神是否我少了哪个步骤?谢谢谢谢回到原帖
This sysfs interface will be exported only if the gpio pins are properly
initialized from ACPI/DT.
你的是pci
youling257
超钻
超钻
  • UID304
  • 注册日期2015-08-01
  • 粉丝435
  • 发帖数5907
  • 威望28281
  • 被喜欢1967
  • 有效bug0
50楼#
发布于:2018-12-15 23:43
seesle:按下后出来一屏幕数字信息,看abs_x最大是是768,abs_y是1024,最小的0?
另外,也是有三个角是触摸没反应的
请问大神接下来怎么做?谢谢
回到原帖
你可以在windows里面把touchsetting.gt
PhysicalXsize=3072 ;Physical size,the unit is 0.1mm
PhysicalYsize=1800
改成
PhysicalXsize=768 ;Physical size,the unit is 0.1mm
PhysicalYsize=1024
seesle
初级
初级
  • UID75119
  • 注册日期2018-12-01
  • 粉丝0
  • 发帖数38
  • 威望227
  • 被喜欢7
  • 有效bug0
  • 忠实会员
51楼#
发布于:2018-12-15 23:45
youling257:This sysfs interface will be exported only if the gpio pins are properly
initialized from ACPI/DT.
你的是pci
回到原帖
我不懂啊,请问大神那还能迂回解决么?
改成
PhysicalXsize=768 ;Physical size,the unit is 0.1mm
PhysicalYsize=1024我试试看
还有那声卡的sh nau8824.txt能否添加到哪个文件里自动执行么?每次开机要手动运行才有声音。谢谢谢谢



已在win10下改为如下正在使用的文件

[Setting]
;UpdateCFG=1
SendCFG=1 ;Send CFG to touch IC when loading driver
SleepDisable=0
PhysicalXsize=768 ;Physical size,the unit is 0.1mm
PhysicalYsize=1024


[Support]
ESD=1 ;Driver supports ESD recovery processing
;SensorID=0 ;According to the different SensorID send different configuration
GtpTool=0 ;GuitarTestPlateform tool support
X2X=-1
Y2Y=1
X2Y=0
Log=1
Flashless=0
ICType=GT910
PrtScreen=0
CtrlAltDel=0
HomeKeyTouchTime=3
VolumeKeyEnable=0


[Feature]
Pen=0 ;stylus/pen support
NumberOfKey=1 ;The total number of keys supported,equal to 0 does not support key
Key1=0xe3 ;0xe3 is home key,Must be a hexadecimal number
Key2=
Key3=
Key4=


[CFG]
DefaultCFG=0x00,0x00,0x03,0x00,0x04,0x0A,0x35,0x01,0x01,0x0A,0x28,0x0A,0x55,0x32,0x03,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x19,0x1B,0x1D,0x14,0x90,0x30,0xAA,0x22,0x24,0x12,0x0C,0x00,0x00,0x00,0x9A,0x03,0x1D,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1A,0x42,0x94,0xD5,0x02,0x07,0x00,0x00,0x04,0x94,0x1C,0x00,0x80,0x22,0x00,0x70,0x29,0x00,0x63,0x32,0x00,0x59,0x3C,0x00,0x59,0x08,0x00,0x00,0x00,0xF0,0x4A,0x3A,0xF0,0x00,0x27,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x19,0x18,0x17,0x16,0x15,0x14,0x11,0x10,0x0F,0x0E,0x0D,0x0C,0x09,0x08,0x07,0x06,0x05,0x04,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x04,0x06,0x07,0x08,0x0A,0x0C,0x0D,0x0E,0x0F,0x10,0x11,0x12,0x13,0x14,0x29,0x28,0x27,0x26,0x25,0x24,0x23,0x22,0x21,0x20,0x1F,0x1E,0x1C,0x1B,0x19,0x2A,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x46,0x01
senserid_0=
senserid_1=
senserid_2=
senserid_3=
senserid_4=
senserid_5=0x00,0x00,0x03,0x00,0x04,0x0A,0x35,0x01,0x01,0x0A,0x28,0x0A,0x55,0x32,0x03,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x19,0x1B,0x1D,0x14,0x90,0x30,0xAA,0x22,0x24,0x12,0x0C,0x00,0x00,0x00,0x9A,0x03,0x1D,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1A,0x42,0x94,0xD5,0x02,0x07,0x00,0x00,0x04,0x94,0x1C,0x00,0x80,0x22,0x00,0x70,0x29,0x00,0x63,0x32,0x00,0x59,0x3C,0x00,0x59,0x08,0x00,0x00,0x00,0xF0,0x4A,0x3A,0xF0,0x00,0x27,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x19,0x18,0x17,0x16,0x15,0x14,0x11,0x10,0x0F,0x0E,0x0D,0x0C,0x09,0x08,0x07,0x06,0x05,0x04,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x04,0x06,0x07,0x08,0x0A,0x0C,0x0D,0x0E,0x0F,0x10,0x11,0x12,0x13,0x14,0x29,0x28,0x27,0x26,0x25,0x24,0x23,0x22,0x21,0x20,0x1F,0x1E,0x1C,0x1B,0x19,0x2A,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x46,0x01
youling257
超钻
超钻
  • UID304
  • 注册日期2015-08-01
  • 粉丝435
  • 发帖数5907
  • 威望28281
  • 被喜欢1967
  • 有效bug0
52楼#
发布于:2018-12-15 23:54
seesle:我不懂啊,请问大神那还能迂回解决么?
改成
PhysicalXsize=768 ;Physical size,the unit is 0.1mm
PhysicalYsize=1024我试试看
还有那声卡的sh nau8824.tx...
回到原帖
sh nau8824.txt以后,alsa_ctl store chtnau8824 -f /sdcard/chtnau8824.state.txt,上传给我,我特么需要

alsa_ctl store chtnau8824 -f /system/etc/alsa/chtnau8824.state
只要有特么/system/etc/alsa/chtnau8824.state,每次进入系统都有声音
seesle
初级
初级
  • UID75119
  • 注册日期2018-12-01
  • 粉丝0
  • 发帖数38
  • 威望227
  • 被喜欢7
  • 有效bug0
  • 忠实会员
53楼#
发布于:2018-12-16 00:06
youling257:sh nau8824.txt以后,alsa_ctl store chtnau8824 -f /sdcard/chtnau8824.state.txt,上传给我,我特么需要

alsa_ctl store chtnau8824 -f /sys...
回到原帖
谢谢大神chtnau8824.state.txt
youling257
超钻
超钻
  • UID304
  • 注册日期2015-08-01
  • 粉丝435
  • 发帖数5907
  • 威望28281
  • 被喜欢1967
  • 有效bug0
54楼#
发布于:2018-12-16 00:11
seesle:谢谢大神回到原帖
在windows里面一边翻转,你是怎么改touchsetting.gt的?
seesle
初级
初级
  • UID75119
  • 注册日期2018-12-01
  • 粉丝0
  • 发帖数38
  • 威望227
  • 被喜欢7
  • 有效bug0
  • 忠实会员
55楼#
发布于:2018-12-16 00:28
youling257:在windows里面一边翻转,你是怎么改touchsetting.gt的?回到原帖
X2X=-1
Y2Y=1

本来都是=0的
youling257
超钻
超钻
  • UID304
  • 注册日期2015-08-01
  • 粉丝435
  • 发帖数5907
  • 威望28281
  • 被喜欢1967
  • 有效bug0
56楼#
发布于:2018-12-16 02:16
seesle:X2X=-1
Y2Y=1

本来都是=0的
回到原帖
换这个goodix.ko,重启,看/sys/class/input/input10/device里面有没有dump文件
cat /sys/class/input/input10/device/dump > /sdcard/dump.txt,上传
附件名称/大小 下载次数 最后更新
goodix.zip (13KB)  2 2018-12-16 02:16
seesle
初级
初级
  • UID75119
  • 注册日期2018-12-01
  • 粉丝0
  • 发帖数38
  • 威望227
  • 被喜欢7
  • 有效bug0
  • 忠实会员
57楼#
发布于:2018-12-16 09:54
youling257:换这个goodix.ko,重启,看/sys/class/input/input10/device里面有没有dump文件
cat /sys/class/input/input10/device/dump > /sdcard/dump.txt,...
回到原帖
谢谢大神,还是没有,替换goodix后还是执行了depmod- a的,这个步骤是需要的吗?
这个goodix连触摸也失效了的,附上dmesg和触摸屏上的编号,可惜找不到原厂cfg

图片:Screenshot_20181216-093758.jpg

dmesg2.txt
youling257
超钻
超钻
  • UID304
  • 注册日期2015-08-01
  • 粉丝435
  • 发帖数5907
  • 威望28281
  • 被喜欢1967
  • 有效bug0
58楼#
发布于:2018-12-16 10:00
seesle:谢谢大神,还是没有,替换goodix后还是执行了depmod- a的,这个步骤是需要的吗?
这个goodix连触摸也失效了的,附上dmesg和触摸屏上的编号,可惜找不到原厂cfg
回到原帖
现在就没加载goodix驱动,
[    6.860590] Goodix-TS i2c-GDIX1001:00: i2c test failed attempt 1: -121
[    6.883006] Goodix-TS i2c-GDIX1001:00: i2c test failed attempt 2: -121
[    6.904483] Goodix-TS i2c-GDIX1001:00: I2C communication failure: -121
[    6.939141] Goodix-TS: probe of i2c-GDIX1001:00 failed with error -121
我再研究研究
seesle
初级
初级
  • UID75119
  • 注册日期2018-12-01
  • 粉丝0
  • 发帖数38
  • 威望227
  • 被喜欢7
  • 有效bug0
  • 忠实会员
59楼#
发布于:2018-12-16 10:20
youling257:现在就没加载goodix驱动,
[    6.860590] Goodix-TS i2c-GDIX1001:00: i2c test failed attempt 1: -121
[    6.883006] Goodix-TS i2c-G...
回到原帖
谢谢大神,辛苦大神了,跟着大神折腾平板如饮醇缪让人欲罢不能啊


dmesg3.txt
最新的还是没有触摸
[seesle于2018-12-16 13:06编辑了帖子]
游客

返回顶部